86-20-36536603
No. 9, Jingsan Road, Hongkong Industrial Park, Development Area, Ganzhou, Jiangxi, China (Mainland)
Detailed Product Description
1)fine mechanicalness
2)radiation resistance
3)cable&wire&injection products
4)high temperature resistant
5)flame retardant
Product Description:
Ethylene - 4 fluorine ethylene (ETFE) is a new kind of fluorine carbon thermoplastic resin, is ethylene and polyflon under the certain proportion F40 resin, the polymerization generation are mainly applied in anti-corrosion lining. The material has PTFE corrosion-resistant propertiesof metal, it has unique strong adhesion properties, overcoming the ptfe for metallic not agglutinate disfigurement, together with its average expansion coefficient is close to the expansion coefficient of carbon steel, and the metal ideal ETFE become composite material, has excellent resistance to negative pressure characteristics.
ETFE is a kind of to crystalline polymer, melting point 265 ~ 270 C; Density were 1.73 ~ 1.75 g/cm3; The long-term use of temperature can be in 60 ~ + 170 °C - with good chemical resistance, heat resistance, abrasion resistance, resistance to radiation and
impact resistance and some insulation performance, especially mechanical properties is good strength and elongation at break in the PFA and FEP.
Product application:
ETFE is widely used in chemical industry, electronic communication, equipment manufacturing, aerospace and other fields. Pumps, valves and pipes, plates lining, fillers, film, fiber, wire sheath insulating layer etc, especially ETFE film material in all walks of life.suitable for electronic industrial use high-temperature wire and cable, high-frequency electric equipment transmission lines,installation line, electronic computer wire insulation, national defense industry by air pump, oil deposits detection and wire cable, metallurgy and architectural fireproof wires and cables.
Attention:
1). Packing in double layers polyethylene plastic bag, again into paper barrel. Each piece of 25kgs net each
2). onto dry in the warehouse storage, storage warehouse and transportation process should keep clear auspicious, dry, presenting mixed impurity; You should avoid strenuous vibration and sunlight and rain, defend packing damage. To ensure that aggregates cleanness and products quality, the ban on the use of hand.
3). This product should avoid under processing more than 370C, use, prevent toxic gases scattered.
LC303 Technical Parameter:
| Physical Performance | Specific Gravity (g/CM3) | 1.73~1.79 |
| Melting Flow Rate(g/10min) | 7-15 | |
| Melting Point (℃) | 265±5 | |
| Mechanical Performance | Tensile Strength (MPa) | 25-45 |
| Breaking Extension (%) | 200-350 | |
| Compression Intensity (MPa) | 20-40 | |
| Shore Hardness | 60 | |
| Coefficient of Kinetic Friction | 0.4 | |
| Thermal Performance | Maximal Temperature of Continuous Work (℃) | 180 |
| Thermal Distortion Temperature (℃) (1.82MPa) | 74 | |
| Coefficient of Linear Expansion *105 (K-1) | 9.0 | |
| Electrical Performance | Volume Resistivity (Ω·CM) | >1017 |
| Insulation Breakdown Voltage (3.2mm) | 16 | |
| Relative Dielectric Constant (1KHz) | 2.4-2.6 | |
| Dielectric Loss Angle Tangent Value (tanδ) (X106Hz) | <0.0005 |
9
about Lichang
Lichang Technology(Ganzhou)Co., Ltd. is a national high tech enterprises with Independent research and development, production, sales of special plastic (fluoroplastic, polyetheretherketone) raw materials. The company is located in Ganzhou Economic and Technological Development Zone, Ganzhou plant covers an area of about 50 acre. Lichang Technology owns a number of branches and representative office in Guangzhou, Shanghai, Zhejiang, Jiangsu,etc. The company was founded in 1995, specializing in research & development and production of fluoroplastic and related special plastic for 20 years. Lichang owns a strong technical team and technical accumulation, and we has obtained independent intellectual property patents nearly 20 pieces. Our company owns a complete and independent research and development center, which contains all kinds of performance laboratory, office of research and development, trial production facilities and equipment. Our main products cover PFA,FEP,ETFE,PVDF and PEEK. In extrusion grade product industry, we occupies more than 60% market share. With the excellent performance, these products are widely used in home appliances, communications, aerospace, motor vehicles, ships, construction and automotive.
Adhering to the enterprise’s spirit of “The sincere survive, the trustworthy thrive
”, and work style of “Honest Initiative Innovation Team”, and under the joint efforts of all the staffs, Lichang Technology will keep making progress, with excellent honesty products and thoughtful after-sales service to win worldwide customers trust and cooperation.
